HTZY 32 screw oil press

Screw oil press uses the electric motor or diesel as the engine. Before pressing, a small amount of oil plant seeds need to be pre-treated, such as peeled or cooked to get higher oil output. At the same time, turn on the heating switch to pre-heat the pressing cage. About 20 minutes later, the temperature can reach the pressing requirement.

For oilseeds feeding both by labor and by alto elevator is feasible. It is the screw-driving force that squeezes oil from oilseeds. With the constant feeding and screw shaft rotating, the space between the rings and the pressing screws is smaller and smaller and squeezes tightly. Edible oil flows to the oil receiving plate and cakes are discharged out.